Download the How To Specify Hanex document in PDF format

How to specify Hanex®

Information about how you should specify Hanex® products is shown below. You can also download this information in PDF printer-friendly format by clicking on the download buttons at the top and bottom of the page.

Architectural Specification

Date:
Architect Details:
This document includes:
Code Section Revision Dated K13 Rigid sheet fine linings/ panelling Project Details:
Construction Date:
Page:

K Linings/Sheathing/Dry partitioning

K13

Rigid sheet fine linings/ panelling

Clauses amended in this revision

 

K13 Rigid sheet fine linings/ panelling

To be read with Preliminaries/ General conditions.

TYPES OF LINING/ PANELLING

 

135 ACRYLIC SOLID SURFACE:

BESPOKE FURNITURE ITEMS Refer to dwg *******

Substrate:

as clause K11/875.

Battens:

Softwood free from decay and active insect attack and with no knots wider than half the width of the section

Finished size:

As required by the fabricator in addition to the steel sub frame.

Moisture content at time of fixing

(maximum): 18%

Spacing (centres)

as required

Method of fixing

as required

Panels:  

Core material

as clause K11/875

Thickness:

as clause K11/875

Fire retardant impregnation treatment: as clause K11/875

Facing sheet:

Acrylic Solid Surface

Manufacturers Agent:

International Decorative Surfaces, Dukesway, Team Valley Trading Estate, Gateshead, Tyne and Wear, NE11 OPZ, Tel: 0845 6037811, Fax: 0191 4917007. Contact: Julie Warner

Product reference:

Colour

Thickness:

12.5 mm. or 6mm

Fire rating:

EN135-1-1b: Surface spread of flame

Colour/ Pattern/ Finish

Colour - samples to be submitted of various finishes available for approval

Backing sheet:  

Durability/ Fire rating

As for facing sheet

Colour/ Pattern/ Finish

Submit proposals

Edge treatment

2mm chamfer to all exposed external edges (refer to architects drawings).

Fabrication:

As section Z10

Adhesive:

To manufacturers recommendations

Moisture content at time of fixing:

As recommended by fabricator to suit environmental conditions

Installation

 

Method of fixing panels:

concealed - to be proposed by fabricator

Joint treatment:

concealed adhered seams

Included features:

as per architects drawings

Accessories:

colour matched sealants for splashbacks, else as per architects drawings and required by fabricator

Download the How To Specify Hanex document in PDF format